-40%
Lot 100 Plain Steel Truss Head Semi-Tubular Rivet 3/16" x 3/4" Long / 5/8" Grip
$ 6.33
- Description
- Size Guide
Description
4440aSG1A.65New Unplated / Plain Steel Truss Head, Serrated Head Underside, Semi-Tubular Rivets, 3/16" Diameter x 3/4" Shank Length, (Approx. 5/8" Grip Length). Each bid quantity is for a Lot of One Hundred (100) Rivets. You may bid / buy any number of lots, up to the total quantity available above.
These were purchased at an industrial liquidation years ago, and they were new in the original bulk boxes. We packaged them in heavy Ziplok bags for resale. There was no manufacturer or part number, but they were probably made in the USA. They are non-plated steel, so you do not have to worry about zinc flakes falling into your devices when spinning these. Using the recommended clinch for a 3/16" rivet will give you an approximate grip length of 5/8" after installation.
According to the calipers
:
Overall length: .810" / 20.58 MM
Length (underside of head to tip): .745" / 18.88 MM
Recommended clinch length: .120" / 3.05 MM
Approximate grip length: .625" / 15.88 MM
Shank diameter: .186" / 4.73 MM
Recommended hole diameter: .196" / 4.98 MM
Depth of hollow (max. clinch depth): .155" / 3.94 MM
Head diameter: .375" / 9.52 MM
Head thickness (installed height): .078" / 1.99 MM
Trade Size: 3/16" x 3/4" (shank diameter x length from underside to tip)
*Note: A few thousandths variation in most dimensions is considered normal tolerance within the industry.