-40%
BIGTREETECH SKR v1.3 3D Printer Controller Board with 4988A Drivers
$ 13.2
- Description
- Size Guide
Description
BIGTREETECH-SKR-V1.3Controller Board
32bit board with LPC1768, support marlin2.0 and smoothieware, support lcd2004/12864, On-board TMC2130 SPI interface
Used ... Tested Good
Four 4988A Stepper Drivers Included
Features:
1) Using 32-bit main frequency 100MHz ARM level Cortex-M3 series LPC1768 main control chip, the performance has been greatly improved;
2) Equipped with highly modular and open source firmware Marlin2.0 and Smoothieware, it is convenient for users to DIY and secondary development, and can avoid worries of not mastering the core code; 3)Marlin2.0 uses powerful development tools, Visual Studio Code integrated development environment: support online debugging, more helpful for product development and performance optimization, using C language development, low development threshold.
4) PCB board wiring is rigorous and beautiful, and specialized in heat dissipation optimization treatment;
5) the use of dedicated power chip, support 12-24v power input;
6) it can accept 24V input and reduce the hotbed current to 1/4 at the same power, effectively solving the heating problem of hotbed MOS tube;
7) Support 2.8-inch and 3.5-inch color touch screens, support 2004 LCD and 12864 LCD.
8) The system supports simplified Chinese, English and other languages, and can switch by itself;
9)Upgrade and configure the firmware through SD card, which is simple, convenient and efficient.
10)The SPI working mode of the TMC2130 driver and the UART working mode driven by the TMC2208,, which eliminates complex wiring process and can be used by simple unplugging jumper cap;
11)Support Resume Printing While Power Off,Filament Break Detection,Automatic Shutdown After Printing and other functions.
12) High performance MOSFET tube, better heat dissipation effect;
13) The use of removable fuse makes the replacement process easier;
14) Reserved extended port SERVOS of PWM signal to support BL Touch;
15) Use the power selection design to separate the USB power supply from the switch power supply, effectively avoiding the situation that the USB port of the computer is burnt out due to short circuit;
16) The special function interface USES the row needle with conspicuous color, which greatly reduces the error rate of wiring.