Armstrong Lift Magnet 330 lb Lift Cpcty, 66 lb Vertical Lift, Ltd Lifetime Wrty

Description

Armstrong LiftMag™ NL-B lifting magnet is manufactured and certified in accordance with ASME standard B30.20.
NL-B series permanent lifting magnets using high energy Neodymium magnets are designed and made for holding, carrying and releasing flat or round ferrous parts without any electrical power supply. They attract flat or round ferrous parts by turning its handle counterclockwise to "On" position and release the parts at "Off" position. For more safety, a special device (Slide Pin) locks the handle at "On" position and keeps the lifter having lift power until operator unlocks it.
Warning: The Lifting Capacity would be derated for thinner plates, greater air gap, higher carbon content in the steel plate and elevated operating temperature. Refer to the derated magnetism chart in image. Max. working temperature is 176°F. If you're uncertain of your lifting application, feel free to contact us before ordering.
* Main Body Length (L) = 5.2" Main Body Width (B) =2.4" Main Body Height (H1) =2.4" Overall Width With Handle (B1) = 6.5" Hoist Ring Height (H2) = 2.2" Bail Opening (CxF) = 1.4"x1.6", Side Ring Inner Diameter (D) = 0.8", Side Ring Height (V) = 1.37", Unit Weight = 5.5 lbs
*
Vertical Lift Cpcty = 66 lbs,
Rated Capacity For Flat = 330 lbs, Min. Load Thickness For Rated Capacity = 3/4", Break Off Force Tested at 3" Flat Plate = 990 lbs, Not work if Load Thickness is less than 1/8"
* Rated Capacity For Round = 132 lbs, Max. Load Diameter for Round = 6"
*
Without using any slings to position the metal parts in vertical orientation
* Rated Lifting Capacity at Safety Factor of 3:1 at least, exceeding ASME B30.20. compliance.
* All Armstrong LiftMag NL-B series Lifting Magnets have Limited Lifetime Warranty.  Contact us for more info.